Thought I'd post yet another question.
The pics of what I'm planning are here: www.sawmillcreek.org/showthread.php?t=108682
(you have to scroll down to post #18, pics 2 and 3)
Q: Do I install most of the conduit and then try to pull wires or should I pull as I go? Here's what I am thinking; install the horizontal runs from above the panel box to the far corner, around the corner to the far window drop. I would then pull wire from the left end to the drop at the right of the far window, leaving enough at the origin end to drop and connect everything into the panel. I could do the other drops afterward as they will be mostly pigtailed in the junction boxes. Is there something I'm missing or a better way?
Thanks to everyone for their help and suggestions.