Roland sp-540v Cut issues

[william kennington]

I know we are not the only sign shop using the Roland 540v wide format printer out there. Its been a great machine for us except for some cutting issues. Sometimes when we put a printed/laminated piece back in to cut out the cut path goes off, for example if we are cutting out decals, the cut is not exact on the cut path. We have had tech support and no luck. Are we missing something. Any assistance is appreciated.

[Doug Bergstrom]

We use the same machine. I hated to do cut projects for the longest time using the Roland software. We switched to Wasatch Rip last year and what a difference in cutting. You can place items wherever you want and the software makes a separate cut file that you can go back to and cut from. Now it takes seconds to set up and cut. Highly recommend switching RIP's.