Red Star Products Multiplex 50-A.
In layman's terms… a 16" radial Arm Saw.
Red Star was bought out by Delta/Rockwell in the late 40's. I think I bought this from the original owner - which is the Port of Houston Authority.
220V, 12AMP, 3PH.
She needs a little work. Looks like an uneducated forklift driver picked it up in the wrong spot. It's missing the crank handle that goes into either of the two holes at the front middle of the cabinet. One screw adjusts the column and the other adjusts the table (I think).
I haven't done a whole lot of research on it yet. It might be a couple years before I get a chance to disassemble, tune, paint and put back together.
IMG_1024.jpg IMG_1025.jpg IMG_1026.jpg IMG_1027.jpg