Incra Miter 3000 Auxilary Fence.. Find?

[John Thompson]

Several days ago someone posted a source for an Incra 27"-49" auxilary miter fence for Incra miter gauges that was sold separate from the entire set-up. Does anyone know a source to get just that miter gauge fence alone?

The fence is listed on the Incra site but.. they link to several dealers that carry their product but.. I can't isolate this fence on any of them. It seems when I clicked on the link that it may have been similar to..

precisioninstruements. something or close...

Any help would be appreciated.

Sarge..

[Paul Fitzgerald]

John,

The only places I've seen them sold separately are:

https://www.incrementaltools.com/Articles.asp?ID=151
http://www.woodpeck.com/flipstopfence.html

Hope this helps,

Paul

[glenn bradley]

I just called Incra direct and got a better price than I found elsewhere on a fence for my V-27. I couldn't find a dealer at that time that was able to get just "parts". I guess I figured they would be more expensive when buying direct but, not so.

[John Thompson]

John,

The only places I've seen them sold separately are:

https://www.incrementaltools.com/Articles.asp?ID=151
http://www.woodpeck.com/flipstopfence.html

Hope this helps,

Paul

That most definitely helps Paul.. as incremental tools is the site I had seen with a $54 price as Woodpeckers is around $80 give or take. Thanks very much as I tried to find the post but it could have been on another forum or buried deep here?

Again.. mucho thanks as I am probably going to get one for my V 27 after I get a few qustions asnwered.

Regards....

Sarge..

[John Thompson]

I just called Incra direct and got a better price than I found elsewhere on a fence for my V-27. I couldn't find a dealer at that time that was able to get just "parts". I guess I figured they would be more expensive when buying direct but, not so.

And thanks to you also, Glenn. I was not aware Incra sold direct but I did want to find out if that 27"-49' fence will work on a standard V 27. I can make a stop for it but I really need to know about the fence itself but from what I read it will. I will call Incra Monday just to be sure before I order from Incremental tools or if there direct buy price is better.. order from them.

Again thanks and regards for the week-end...

Sarge..

[Paul Fitzgerald]

Incremental Tools is Incra's direct sales site.

[John Thompson]

When I went to the site Paul.. it pretty much clarified what you just said at the bottom with the Taylor Group or similar wording as that was an hour ago. So.. I highly suspected it was the direct link Glenn mentioned from that plus the major difference in price. I wish I had known that on the two occasions I purchased V 27's.

I live in my shop practically and don't get out much, obviously. And I suppose it shows...

Thanks extremely much as that is the exact site I referred to I had seen with the cheaper price.

Regards as time to go a-Racin' in Richmond...

Sarge..