Can anyone tell me why I'm losing images on the top left hand corner of engraving table. I have a radius 30 watt. I have already tried cleaning the lens. Please help!
Thanks George
Can anyone tell me why I'm losing images on the top left hand corner of engraving table. I have a radius 30 watt. I have already tried cleaning the lens. Please help!
Thanks George
Dave J
Forums: Where all too often, logic is the first casualty.
Tring to do an image that is needed on the upper left hand corner of the table. The image is a ribbon with bells for a wedding photo frame. The right hand side is alot darker then the left side. Left side is not really visable. From the edge of the ruler it is not engraving about a 2 x 2 area across and down the left side.
Thanks George
Hi,
Check the level of the bed..
See the alignment of the beam, at all four corners of the machine
May be the lens would have got slightly tilted
Rgds,
Saravanakumar
Epilog Legend 24 EX - 75W with Rotary
Fiber laser Marker 20w ( IPG)
Flat bed heat press, Mug printing, Epson 230 x 2
Flame Polishing machine, Acrylic Bender, Nicejet Flatbed printer A3+, Electrochemical etcher.
"If you think you can or you cannot - you're right" HENRY FORD
George,
Call Tech Support at (303)215-9171 -- they'd be happy to help!
Jeanette Brewer
Engraving Concepts