This is an unfinished cabinet I'm working on to store my resident's medication....I still need to make a door that I can lock...just can't deside on the style....the carcass is scraps of plywood that is maple on one side and birch on the other...picked it up from a construction site near by...the edge is trimmed with strips of lace wood and the drawer sides are mahogany....I made the drawer fronts from some bigleaf maple that I milled using an Alaskan sawmill some years ago...finally found a use for it....the corners of the carcass are mitered and on the dry fit they were almost dead on...when it came to the glue-up I didn't pay attention to the clamps and I wound up with gaps...so I cut a notch in the corners and put in the mahogany strips...worked out ok...the back is scrap walnut ply the size of which dictated the size of the project.
Anyway, thanks for looking.
Greg