I am planning on running a Wood magazine type cyclone as a dust seperator connected to a Grizzly 2hp. blower w/a 12" impeller (from a 1029z DC) through all 6" lines which will then blow the fines outside unimpeded, so there will be no back pressure. My longest run will be about 10' vertical and 16' horizontal to my tablesaw. The 8" jointer and 15" planer will have about a 8' vertical and 10' horizontal run. The distances are set and there will be no way to change the piping, but I can, and will, eventually change the blower size if needed.

Does any one have any ideas on whether they think that this blower set will work, and why ? I'm looking for any ideas to help me tweak this set up before it gets set up.

Thanks in advance,
Jimmy