Nice find, I'd keep it. But i would put that 80 tooth blade on a miter saw instead of the table saw.
Nice find, I'd keep it. But i would put that 80 tooth blade on a miter saw instead of the table saw.
If that picture is your saw it has 3660 on the label which is the granite saw and is the newest ridgid.
The granite saw is the 4511.
The picture of the saw from the OP is the 3650. The 3660 has braces around the whole skirt of the leg-set, the 3650 only has the braces in front and back as seen.
Either way....3650,3660,4511....they are all good saws and definitely worth 150.00.
Another YOU SUCK!
You're welcome!
I mis read the label. I have the same saw and am more than satisfied with it. If you will go to this site you can find real good help on setting the saw up.
http://www.ridgidforum.com/forum/index.php
Duhh, keep it.
That herc-u-lift alone was probably close to a $100 extra when the saw was new.
Now as for negotiating/explaining to your wife... you're on your own.
But seriously, that was a good, no great, deal.
"It's Not About You."
Nice. I missed out on a newer Delta 3 horse power shaper for 500 dollars. I just was not fast enough.
Nice find and great price. I would keep it and turn it into a dedicated dado saw. Make some inserts for the different width dadoes. That way you can keep your original saw for sawing. Maybe even add a router table to the side.
This pretty much sums up my opinion ...
to your significant other I'd recommend not resetting your search mechanism to 3 h.p. cabinet saws.
Yes this rates a premium quality "YOU SUCK!"
Bolt the two together. Use the right one as a dedicated Dado blade setup.
Brian