This is approximately 7 1/4" X 3 3/4" with a 1 3/4" opening. The opening is a little large. Hopefully, the openings on the next ones will get smaller as I gain experience and confidence with hollow forms. I rough turned it green with a scraper and a Sorby midi Hollowmaster which was really too small for the task. I finished turned after a few months with my new set of 1/2" John Jordan tools. It is finished with Antique Oil.
I am still struggling with the photography. I think I am getting the exposure right but still had to use software to fix the contrast as the originals all were a little washed out. Maybe from light flare? I am using Jamie Donaldson's Phrugal Photo Studio witha Halogen shoplight. I set the custom white balance using a white card as I do not have a phto grey card.
All comments and suggestions on the HF or photography are welcome. Looking to improve technique on both.