I have been offered a white oak tree that was recently felled in a storm. This is on the farm, not a city tree. It came down with a huge root ball attached. The tree splits into three branches at 32 ft. At three feet from what was ground level, the circumference is a little over 9 ft. At 15 foot from ground it measures almost 8 ft. and at 32 feet it measures a little over 6 ft. I haven't seen it and don't know if it is solid. Does anyone have an estimate of the board feet in the tree and does anyone in East Tennessee know who could mill this? Is there a portable mill that will handle a tree this size?