They are all done, 6 coats of Arm-R-Seal and a bunch of 0000 steelwool.
One table and two chairs for each grand daughters, the daughters did not want 4 chairs, just did not have the space for them.
All maple, the tables are 24" x 36" and 19 inches high the chairs are 11 3/4" x 11 3/4" and 12 inches high. They are all my own plans, just some drawing and 3 prototype chairs.
All joints are done with dowels with the the DowelMax, love that tool. The back slats on the chairs are mortised with the Mortise Pal. The chair test was done with a 200 lb. man setting in the chair and leaning back on the back lags for 20 min.
My only big screw up was the center board on the one table, it just did not match like I thought it would when I put the finish on.
P8099022.jpg P8099023.jpg
P8099026.jpg