Sam, I had seen your pictures before. I may steal/modify your design for my set up. I built a box bay window in the middle of the wall where my SCMS docks in my multipurpose bench set up. I have 10+ feet on either side of the blade. I need something that stays in the box bay opening instead of traveling with the saw, as my SCMS is mobile and I will also be rolling my RAS there. I mounted a whole house vacuum unit my Dad scrounged for me, that was being thrown away, that I will attach to the blade shroud hook up for both saws. 6" pipe from the cyclone to the main pick up. I hope for good results! Now I need to find time to actually work on it. I did cut down the table for the RAS to fit in the 3' wide spot, so at least I got that far. Jim.
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.