I want to build 6 chairs. My thought is to buy Lee Valley plan which includes full size paper templates of all parts. My thinking is to create a 1/4 inch Baltic ply template of each part, use it to trace the outline on 3/4 inch cedar boards then cut close to line w scroll saw.
Finally, secure template to rough sawn cedar part and make final cuts on a router table with trim bits following the template.
I woud welcome comments on this approach. I've never made a template so I guess this will be trial and error w various sanders trying to get smooth contours. Is Baltic Ply a good choice for template? Will my Dewalt 788 scroll saw be adequate for cutting 3/4 inch Cedar?