Hi guys,
I want just to show you my latest artwork.
It is RGB fading LED in aluminium pipe.
You can watch video on
http://www.youtube.com/watch?v=QdnE6B3f2o0
Sorry for my english.
Hi guys,
I want just to show you my latest artwork.
It is RGB fading LED in aluminium pipe.
You can watch video on
http://www.youtube.com/watch?v=QdnE6B3f2o0
Sorry for my english.
Zlatko
Welcome to Sawmill Creek.
Very nice work and a good idea.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Nice work Zlatko,
Did you make the LED assembly yourself? If you made it yourself, can you let me know if there were any difficulties?
I've been looking for something similar that is available in the UK. But they usually seem to be very expensive here. Maybe I should make my own as I can get the individual parts quite easily.
Stuart Orrell
LS6040 40W, CS3, Lasercut 5.1, SolidWorks,
Nice job. The acrylic does look good when lit from underneath, magical of a night time. Congratulations on getting the moving colours.
Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender
I love this! I'm sure everyone would like to know where the base came from. It's quite sleek and attractive. Those of us who make nightlights are always looking for something new and different. Thanks for sharing and welcome to the Creek!
cheers, dee
Epilog Mini 18/25w & 35w, Mac and Vaio, Corel x3, typical art toys, airbrush... I'm a Laserhead, my husband is a Neanderthal - go figure
Red Coin Mah Jong
Dee,
Sounds like he made it. Aluminum pipe slit down the side to hold the plexi, LED strip inside
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I saw one of these at one of the eye glass stores recently when I went to buy some new cheaters. The base was black acrylic but the light changed colors like this one.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Here is some pictures how I made it.
For now, electronic circuit is outside of pipe but in future I will make all inside.
I use RGB LED with ATMEL microcontroller (I am electrician).
Stuart, it is very easy circuit with few elements but for microcontroller you must have programmer to fill it with right programm.
I can send schematic of circuit and program, but you must fill a microcontroller.
Hi Zlatko,
Thank you very much for your explanation and pictures. There's no need to send me any further information but others may be interested. I have some local clients that can help me out with the electronics side and prototyping.
The end result looks great. Thanks again!
Stuart Orrell
LS6040 40W, CS3, Lasercut 5.1, SolidWorks,