Greetings, I have agreed to help a friend build a table top.
Vary widths of top 3-4-5 -? inch.
He wants to FRAME with a 3 or 4 inch wide mitered outside.
table.JPG

I am concerned that the miter joints will not remain stable with
changes in moisture.
Present plan is to use biscuits every 4-6 inches to glue edges.

Friend thinks he would like to use two different woods.

Thank you for all suggestions for any and all phases of this job.

[IMG]file:///C:/DOCUME%7E1/NORRIS%7E1/LOCALS%7E1/Temp/moz-screenshot.png[/IMG]