Since I enjoy looking at everybody's work so much I thought I'd share my latest project. It's the first time I've ever build something like this with the carcass/face frame, panel doors, etc. Figured it'd be a good place to start before building cabinets for by shop which are sorely needed. The 24/32 plywood carcass is dado'd together. The face frame is dado'd into the carcass as I felt this would make it stronger when moving it around. This meant that there was small pcs that where easy to chip out in several strategic places, which they did and I had to glue filler pcs in. The face frame is cut down from 2x6 pine from HD. The middle styles (I think that's what they are called) are mortise and tenoned in and I could have made them fit a bit tighter. And I guess if I would have made the top smaller than the bottom it would have looked better. I'm going to prime and paint it. The picture with the table saw in the foreground is where I was building the doors and took a break
Reply With Quote