Have any SawMill Creekers built a storage box for their Dowelmax?
I am searching for something functional that would also contain the wood dowels. Just looking for ideas.
Thanks,
Jerry Todd
Have any SawMill Creekers built a storage box for their Dowelmax?
I am searching for something functional that would also contain the wood dowels. Just looking for ideas.
Thanks,
Jerry Todd
Jerry in the Sunshine State
Nam Vet, 67-68
"If you're going to be stupid you got to be tough"
Hi Jerry,
This thread may give you some ideas
http://www.sawmillcreek.org/showthre...light=DowelMax
Have a Good One,
Brent
SPCHT
Jerry, I thought about building one, but I decided to spend my time on other projects (limited shop time) so I just bought a cheap plastic tool box to keep mine in. You can pick one up for about $10.00 to $15.00, but it’s not fancy or custom but very functional. But there are some nice ideas in Brent’s post / thread of the old post from SMC.
Good luck!
Richard
Richard Poitras
Central, Michigan....
01-02-2006
I use the case from my Bosch PS20 driver.
There's enough room for the 1/4" accessories and a couple of bags of dowels.