Post Office Box Doors - Cleaning

[Jim Eller]

I just picked up a few post office box doors for banks for the grand-kids. The doors are in good shape but need to be polished, buffed or something. They have a lot of nooks and crannies.

Does anyone have any suggestions for cleaning these things to make them look like new instead of the stamped date of 1955? A solution without a lot of elbow grease would be nice.

Thanks,
Jim

[Mac McQuinn]

A friend hooked me up to a Soda Blaster from Harbor Freight. Works very nicely on British Motorcycle Carburetor bodies which are a zinc like material. They look like new, not overdone and shiny but like newly cast material. Might be worth looking into & considering.

Mac

[Dell Littlefield]

Know anyone who cleans clocks ultrasonically? The clock cleaning solution will leave them very clean and pretty shiny.

[Jeff Nolan]

I second the blasting suggestion. Call around and look for someone who can blast with a soft abrasive like corn cobs or walnut shells, but pumice might be an option as well. You want an abrasive for that won't etch the surface, just clean it and give it uniformity.

[Bill ThompsonNM]

Before I'd start looking for sandblasters I would try:
Brasso (cleans brass, copper and zinc), copper cleaners ( see your grocer )
and lemon juice and salt with a toothbrush.
You'd be surprised what you can clean with simple solutions.

[Alan Schaffter]

Are you sure they are dirty? It could be a cheap/thin (brass?) plating pealing off.

[Jim Eller]

Bill: If they clean with Brasso, what do you recommend for a sealer coat?

Alan: They look tarnished and dirty. They were in a post office since 1955.

[ROY DICK]

Toothpaste and a tooth brush, or never dull.

Roy

[Larry Edgerton]

Where did you buy those? I would be interested in picking up a few myself.

Larry

[Bill ThompsonNM]

Things like that I just use a couple of coats of spray lacquer from a can.

[Gene Howe]

Where did you buy those? I would be interested in picking up a few myself.

Larry

How many do you want? I have quite a few.

[Jim Eller]

Larry,

You have a PM

[Alan Schaffter]

Brasso, or any jewelry or silverware polish should work. One thing about brass is that it needs to be cleaned well, the oxide and polish completely removed, and finally sealed well (usually with lacquer) without touching it with bare hands. If you don't it will tarnish again fairly quickly even under the lacquer.

Test the cleaner on the back or an edge first.

[Dan West02]

You have another PM

[Brad Kaufman]

Soak them in a solution of 50% ammonina and 50% coca cola. Use a small brush for the nook and cannies.