Ok, I've lurked long enough - time to jump in.
Some pics of the project I worked on over the Christmas break (and some other random shop pics):
http://picasaweb.google.com/jeffhuettner/ShopPics
I found a Jet cabinet saw for a good price on craigslist that I couldn't pass up, so I jumped on it and sold my Delta contractor saw. Then, I needed a mobile base for it, and that just logically led to building the router table cabinet I always wanted to add to my old saw. I had to buy 1 4x8 sheet of plywood - the rest of the plywood and hardwood was all scraps/leftovers I had on hand. Its still a work in progress (need to build a hinged outfeed table, plumb the dust collection, etc), but then again it seems like *all* my shop projects remain "works in progress" (witness the lack of drawer/door fronts on the cabinets under the CMS).
Comments welcome