Greetings gang: I'm heading into the design stage of my next project. It's going to be a corner cabinet. We have one small corner that needs something in it, so I think this will do nicely. OK I'm a newbie so here come the questions. I measured from the corner to the edge and I have 22 3/8" to work with. I then measured 22 3/8" the other way. No when I measure the distance between the two marks, that is the width of the front correct?? And with the carcuss being angled how does the face frame attach? Is there a standard height? And lastly if I'm correct the front will be roughly about 30 3/4", will this small size be appealing to look at or is it to small. Any other thought suggestions or help would be most helpful to me. Thanks in advance for your help.