Hi Everyone!
I am having a problem with my Jet 14" bandsaw. It just started today. I always loosen the tension on the blade each day when I am finished using the saw. Today when I started putting tension on the blade, I noticed a bumping feeling when I hand rotated the top wheel. What was happening was each spoke on the wheel was hitting a part of the aligning mechanism as the wheel rotated. In the photos I am using a pencil to point to the spot that hits the back of the spokes. I need to know how to adjust this so the spokes don't hit it. It doesn't look like it is bent but I could be wrong. Any ideas on how to fix this will be appreciated. Thanks, Pete