Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: Headboard for my Bride

  1. #1
    Join Date
    Dec 2003
    Location
    Snoqualmie Wa
    Posts
    79

    Headboard for my Bride

    If you enjoy doing mortise's, this is a fun project. There is a total of 48 of them in this project.

    The headboard was made with some recycled White Oak that is over 100 years old. It is a little troublesome to take off the old finish, flatten out the boards that are cupped, but well worth it in the end. I might add that it is very hard and the moisture level averaged 2 1/2 to 3%.

    The headboard was finished with a Dark Old English stain, then sealed with 3 coats of a mix of spar Varnish and BLO. I made it as a surprise for my Bride for her birthday. I did get an Atta-boy!
    Attached Images Attached Images

  2. #2
    Join Date
    Feb 2004
    Location
    Clermont County, OH
    Posts
    1,272
    Nice....to many mortises for me though.....

  3. #3
    Join Date
    Jul 2004
    Location
    Clinton, British Columbia
    Posts
    313
    Beautiful headboard Dave! Can't believe you didn't get a few hugs and kisses along with that "Atta-Boy" Really awesome job!

  4. #4
    Join Date
    Feb 2003
    Location
    Tidewater, VA
    Posts
    2,124
    Dave -

    That looks great! When are you going to be installed?

    Any plans for a footboard to go alomg with it?

    Regards,
    Ted

  5. #5
    Join Date
    Jun 2003
    Location
    Portsmouth, VA
    Posts
    1,218
    Dave, that's an excellent looking headboard. Congrats and thanks for sharing that pic.

    Be well,

    Doc

  6. #6
    Join Date
    Feb 2003
    Location
    Knoxville TN.
    Posts
    2,667
    Dave that's a very nice headboard. Thanks for sharing.
    Dick

    No Pain-No Gain- Not!
    No Pain-Good

  7. #7
    Join Date
    May 2004
    Location
    N Illinois
    Posts
    4,602
    Dave great job!!! You ve lots of patience with all those M/Ts. Looks Good!!
    Jerry

  8. #8
    Join Date
    Feb 2003
    Location
    Gainesville, Florida
    Posts
    743
    You did 48 mortises and only got one atta-boy!

    Dave, you are a great woodworker but a lousy negotiator.
    Kent Cori

    Half a bubble off plumb

  9. #9

    Thumbs up Great job

    Looks great

  10. #10
    Join Date
    Sep 2004
    Location
    Jacksonville, FL
    Posts
    859
    Looks great Dave.

    What did you use to make the mortises?
    Marshall
    ---------------------------
    A Stickley fan boy.

  11. #11
    Join Date
    Aug 2004
    Location
    Baltimore, Md
    Posts
    1,785
    Very nicely done ! Looks AWESOME !

  12. #12
    Join Date
    Sep 2003
    Location
    Grand Marais, MN. A transplant from Minneapolis
    Posts
    5,513
    Bravo Bravo!
    TJH
    Live Like You Mean It.



    http://www.northhouse.org/

  13. #13
    Join Date
    Dec 2003
    Location
    Snoqualmie Wa
    Posts
    79

    Smile

    Thanks for all the kind words.

    Marshell, all of the mortise's were made using my dedicated motiser with the exception of the last 3 on each end of the curved portion of the top rail. Those I did by hand because it was to high to fit under the machine.

    Kent & Shelly, because this is a family rated site, I felt that "attaboy" was a good choice of wording.

    Ted, I installed it Tuesday while the bride was at work. No footboard is planned. Our house was built in 1917 so we are not blessed with a large bedroom.

  14. #14
    Join Date
    Dec 2003
    Location
    Delton,Michigan
    Posts
    668

    nice head board!!

    dave you done a very nice job on that head board, and the idea of using recycled lumber makes it more special, was the lumber from something sentimental to your family>? thanks for showing us your work,
    If in Doubt? Build it Stought!

  15. #15
    Join Date
    Dec 2003
    Location
    Snoqualmie Wa
    Posts
    79
    Larry, you have forced me into sneaking in a very BIG gloat! The Oak came out of a mansion in Seattle. The Oak was installed in 1903. I was given, yep yep, given just a bit over 3000 bd ft of it, just for hauling it off. Some of the stock is a full 2" X 18" X 17'6".

    Now you know why I do so much with Oak.

Similar Threads

  1. Building a Rustic Headboard, need some advice.
    By Tim Morton in forum General Woodworking and Power Tools
    Replies: 12
    Last Post: 05-02-2004, 12:19 PM
  2. Bendy headboard and footboard!
    By Kirk (KC) Constable in forum General Woodworking and Power Tools
    Replies: 7
    Last Post: 01-05-2004, 5:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •