I am in the process of building a kitchen pantry for a guy at work. It is 5' wide X 7' tall. It is going to have 3 shelves with 2' between them. It will be built in two modules because of the size. It will have two doors on each module, top door will be 25" X 26" and bottom will be 25" X 50". The problem is I can not use glued up panels for the center of the doors because they weigh too much. The customer likes a slab type door, so I was thinking about using 1/2" plywood. I am not sure what type of design to use for the framework of the doors. It will be 3/4" oak. I am sure somebody else out there has run into the same problem. I am open for suggestions.
Thanks