-
I left the panel in the press all night and the visible glue cured. The mesh popped off easily but had some glue stuck in it that I had to work out. The panel came clean with a card scraper after about ten minutes. I think a little less glue on the next one might help but the zebra is just porous and the scraping just means less sanding if any.
A question for the guys with pumps. Does the pump turn on for every cycle of the vac switch to maintain pressure? I get a 3 second whoosh every five or ten minutes (the interval seemed longer the longer the panel was in the bag). If that pump kept coming on it would bother me and I can't imagine dealing with a continuous run system.
What's the advantage of a pump system other than not needing a compressor?
Last edited by Richard Dragin; 02-21-2010 at 2:13 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules