[OP]
Member
I am having so much trouble with my Delta AP400. Not collecting below 30 microns creates too much fine dust accumulations and I decided that it would be best to replace it.
I am considering the Delta 50 -760 , Grizzly G1029, and the PSI DC200B. Wood Magazine rated these very highly. I was surprised that the Harbor Freight unit did not perform well. I want the filter to be at the 1 micron level.
Any comments on these machines would be appreciated.
Contributor
The Delta 50-760 is popular and can be improved down the road. Menards sell these at $399.xx and occasionally runs a sale using their credit card at 10% off. You can add a Wynns filter which will get you into the .5 Micro range and some guys have installed the large Dust Deputy for cyclone action.....tough to beat for the money. I think it would be a good D/C for at tool point of use, 10' hose Max.
Mac
Last edited by Mac McQuinn; 02-14-2010 at 8:33 PM.
Reply With Quote
