For a project delivering on thurs day I had to create this curved base.
It fits around a 2in radius on the corners of an 8 in tall platform.
I glued up a 4.75 thick 12in long 7.75in wide block of poplar and did a lead in cut with the large profile bit in one pass very slowly.... I did get some tearout on the face of two of the corners and wondered if anyone could suggest a better way to get a cleaner cut. All in all it came out well it is getting painted so a little filler never hurt A little time on the band saw and with the sanders and they will be ready to install!!
Thanks for looking,
Nick