Medallion Request

[Aaron Montgomery]

Five years ago, Steve Krim made some medallions for me to mark my projects with. I asked him for 5 medallions for each year from 2005-2009. As it is now 2010, I am out of medallions for current and future projects. I'm hoping that one of the talented folks on this forum can whip up a new batch of like medallions for the next 5-10 years. (5/yr would probably be sufficient) I recall that these were metric, but they fit well using a 1 3/8 forsner bit and I believe they were done in maple. I've attached a copy of the medallions that I've been using. Let me know if you can help me out.

[Kenneth Hertzog]

Aaron
those are not a big issue
are they the whole way thru or just engraved
send me a PM.
Ken

[Aaron Montgomery]

Hi Kenneth,

Those are engraved and not through. They're probably 1/8" thick. I've got another Creeker that's offered to make the medallions through PM. If that doesn't work out, I'll post back and let you know. I knew it wouldn't take too long to find one of our talented folks willing to whip these out.

Thanks,

Aaron

[Dan Hintz]

Ken,

Has to be engraved... notice the insets in the 'a', 'g', '0', etc.

[Kenneth Hertzog]

Thank you Dan for correcting me
I guess I didn't look close enough
the grain in the ENGRAVED piece is running in a different direction
I will try and do better next time