Hi all,
I'm having a problem and I need your help. I'm refininshing kitchen cabinets and having problems brushing the lacquer over the finish.
This is the procedure i'm using...
I'm stripping the current finish with a stripper.
Sanding
Remove the dust
Applying the Varthane stain.
Then apply the watco laquer.
When brushing the lacquer it appears to be dissolving the stain and wiping off with the brush. The last set of cabinets I allowed to 72+ hours of drying time after applying the stain.
What am I doing wrong? Is lacquer not meant to be applied over stain. I'm ready to move back to poly.
Thanks!