Hello all!
Thought I’d put together a little tour of the shop. The old guys have seen it all a million times before but I thought some of you newer types might enjoy giving it a look. I’ll bust it up into 3 separate posts.
We’ll start with the outside… The shop is 30x40 with 10’ ceilings.
Cyclone is right inside the door. Bill Pentz design that I built. All 6” PVC ductwork with blastgates that I built along with a bunch of hood upgrades and such for the tools. The Delta scroll saw is right next to the cyclone.
West wall has wall bench. Perfomax 16-32, Jet lathe, clamp storage etc..
Around the corner on the south wall is the Hitachi 10” SCMS, Ridgid spindle sander and shop vac., Delta mortiser is stored under the SCMS. Storage on the wall here also.
In front of the miter saw station in the Griz G0500 8” jointer. It’s on the back of the router/planer station.
More to come....