I had a piece of black painted brass got dropped so so I use it as a test piece. Can I spray paint it black again and reuse in the laser safely? I have a few cans of spray paint just the stuff from wally world or HD.
Thanks
Penny
I had a piece of black painted brass got dropped so so I use it as a test piece. Can I spray paint it black again and reuse in the laser safely? I have a few cans of spray paint just the stuff from wally world or HD.
Thanks
Penny
Pinnacle(Mercury) 40W , Epilog Legend 24 TT,Geo Knight Heat Press ,Geo Knight Cup Press, CorelDrawX4,Ricoh GX7000 and more!!!!!!!!!!!
ULS X-2 660, Corel X3, Haas VF4, Graphtec vinyl cutter, Xenetech rotaries (3), Dahlgren Tables, Gorton P2-3, New Hermes pantographs (2), and recently, 24" x 36" chinese router. Also do sublimation, sand blasting, & metal photo. Engraver since 1975.
Is there even such a thing as "PVC paint"?
The original paint was probably lacquer, and you'll probably have your best results with that anyway.
Almost everything you'll find in a spray can at Wallyworld or HD is either lacquer or enamel, no problem either way.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Thank you very much for answering me back I guess I will find out today .
Pinnacle(Mercury) 40W , Epilog Legend 24 TT,Geo Knight Heat Press ,Geo Knight Cup Press, CorelDrawX4,Ricoh GX7000 and more!!!!!!!!!!!