I am having a tough time finding top loading upcut spiral end mills for routing aluminum and brass with a Xenetech. The diameter of the shaft is .170". Does anyone have any suggestions where to shop besides Bur-Lane and Gravograph?
Thanks,
Eric
I am having a tough time finding top loading upcut spiral end mills for routing aluminum and brass with a Xenetech. The diameter of the shaft is .170". Does anyone have any suggestions where to shop besides Bur-Lane and Gravograph?
Thanks,
Eric
Eric
That's probably an 11/64" cutter and Johnson Plastics and JDS both have them. I'm not sure they're up-cuts but think they are.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Flutes on the bit pull the chips up toward the spindle.... Down cut, push chips away from spindle....
AL
1 Laser, 4 CarveWrights, Star 912 Rotary, CLTT, Sublimation, FC7000 Vinyl, 911 Signs, Street Signs, Tourist Products and more.
Home of the Fire Department "Epoxy Dome Accountability Tag and Accountability Boards".
Try bits and bits.
Mark
ULS X-2 660, Corel X3, Haas VF4, Graphtec vinyl cutter, Xenetech rotaries (3), Dahlgren Tables, Gorton P2-3, New Hermes pantographs (2), and recently, 24" x 36" chinese router. Also do sublimation, sand blasting, & metal photo. Engraver since 1975.
Right hand Helix. CNC router folks have renamed things that have been in use for 100 years in the metal working side of things.
The call up cut what we call right hand helix. They call left hand helix "down cut".
It's very confusing to see all these things that already existed being renamed to something completely different.
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Thanks Al,
Up-push, isn't that suggesting a normal Positive cutting rake?
A down-push would need a Negative rake and I can't see how that would ever cut. the point being that aren't all milling cutters up-push?
I have been around milling cutters for 50+ years and can't recall seeing a "down-push" one. I have been wrong before and will be again.
Dave J
Forums: Where all too often, logic is the first casualty.
http://www.antaresinc.net/
Good cutters and they know what they are doing.
Why dont you use a single flute straight cutter instead of the end mills? Do you have a cutter grinder?
Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
Roland 2300 rotary . 3 x ISEL's ..1m x 500mm CnC .
Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
6 x longtai lasers 400x600 60w , 1 x longtai 20w fiber
2x Gravo manual engravers , Roland 540 large format printer/cutter. CLTT setup
1600mm hot and cold laminator , 3x Dopag resin dispensers , sandblasting setup, acid etcher