Joe can you clarify you meant speed 8? See the two photos below, I only have a 40 watt zing.
Also what DPI are you using when cutting MDF?
101_2159.JPG
101_2160.JPG
Joe can you clarify you meant speed 8? See the two photos below, I only have a 40 watt zing.
Also what DPI are you using when cutting MDF?
101_2159.JPG
101_2160.JPG
Last edited by Steve Schlumpf; 04-11-2010 at 10:04 AM. Reason: resized photos
Zachary,
Please edit your photos down to a more reasonable size...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
The settings that eventually worked for me on 1/4" MDF were
500 dpi
22 speed
100 power
680 freq
Thanks
Zach
Glad to know you got it working.
Thank you for posting your settings so future zing owners will have data to start with.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."