[OP]
Member
All three are end grain, turned from the same tree. 6" x 4˝", 7" x 5", 9" x 6˝" and 1/8 to 3/16" thick. They were rough turned, soaked in DNA and dried, then re-turned. Not real happy with the top openings, would appreciate your comments and critiques. Antique oil finish.
Ron
Triple Walnuts.JPG
Moderator
Looks pretty good to me Ron! Really nice forms, beautiful wood and finish!
What is it you don't like with the openings? The size? The slight rise? Just curious...
Steve
“You never know what you got til it's gone!”
Please don’t let that happen!
Become a financial Contributor today!
Contributor
Ron, they all look great, and I know they are displayed as a grouping, but I do like the middle one better. You did a beautiful job on these. Very well turned, and the finish is fantastic. I am a walnut lover, anyway, and it is just great wood for turning or flatwork.
From the pic, the color doesn't look to be from an oil finish, even though that is what you used. Is it the lighting? Would seem the walnut would appear warmer/darker.
Member
I like them all just like they are.
Member
I think they look good Ron. Nice forms and finish.
Member
Ron,
I agree with the others, very nice.
Jim
Member
Very well done Ron. The center & right one appeal to me the most as far as form goes, but they are all nice and a great finish.
[OP]
Member
I think they need more of a lip, or a rise at the opening, maybe I am to picky. Thank you for the comment.Originally Posted by Steve Schlumpf
[OP]
Member
It is called MinWax Antique Oil but it is a wipe on poly. Thanks.
Member
Very nice Ron. The center one is my favorite for form. I wonder how much of that preference is because the grain pattern more closely matches the outside shape. I notice those things on my own turnings but usually after they have come off the lathe.
In Memoriam
Ron, The areas from the shoulder up need to curve a bit more toward horizontal, and then finish with a recurve upwards to a small lip. This one isn't perfect, but you get the idea.
Last edited by Richard Madison; 04-07-2010 at 5:29 PM.
Richard in Wimberley
Member
Great job. The grain on those pieces is really nice. BTW, the MAO is a wiping oil varnish, not a poly, at least that's what they call it anyway. It's my favorite finish as well. It gives a nice satiny compromise to the ultra high gloss that seems to make some things look unreal.
As to your forms, I would have to agree with you on the rims, but since you twice turned them, it sounds like they'd be good candidates for a contrasting wood to complement the walnut; maybe an ebonizing treatment or light maple would work as a finial. Play with it and keep us pictorally informed!
Last edited by Nathan Hawkes; 04-07-2010 at 10:18 PM.
Contributor
Ron those look great. Form and finish look very nice.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Member
I love all three of them. I'm gonna try that finish... It's fantastic. I'd proudly display any of them or all of them. Great job.
Member
Ron,
I think they look great. The shapes are nice, the curves flow well and the bottoms are consistent and correctly proportional to the tops. If anything the entry holes may be a bit on the big size for the vessels. If they were 3/4 their size I think you would be happier. I don't know what tools you are working with, they my be limiting the size. If not try a piece with a smaller hole, you can always go bigger. Good job.
AO is an oil finish, not a poly. I use it a lot and have for a long time. As I turn more it is becoming the finish I like the best. It will build well and you can go from a nice satin finish all the way to glossy. Not as glossy as poly or laq though.
Posting Permissions
Reply With Quote