I will resurrect this old thread as I have this same lathe and (just like Greg) am now looking to purchase a drill chuck. From reading this thread it sounds like the 46-460 has a #2 morse taper. However, there seems to be a problem with the length of some of the chucks. I'd prefer not to have to modify it. Does anyone know of a drill chuck that is compatible "as is" with the 46-460?
I am looking at this one, but don't want to make the purchase only to find out that it needs modification to fit.
http://www.amazon.com/PSI-Woodworkin...7100233&sr=1-3