i was wondering if anyone knew the paint codes to general/general international woodworking equipment. i know they sell it by the touch up can, but i hopefully someone out there can help. thanks in advance, Chris
i was wondering if anyone knew the paint codes to general/general international woodworking equipment. i know they sell it by the touch up can, but i hopefully someone out there can help. thanks in advance, Chris
I had a Canadian-built 10" tablesaw, and the International (Chinese) version of their sliding table. The color match was very, very close.
There are dealers scattered across the country where you could see one. But as far as getting a name, or a mixture formula for the exact color, I just don't know.
Gary Curtis
Contact General and ask. If they won't give you the formula, then purchase some touch up, then color match it. Keep in mind that any primer or base coat can change the top coat color enough to not be a perfect match. Jim.
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
There's a thread over at Canadian Woodworking forum discussing Generals (evolving) paint color and matching it.
Try here to start
I tried to get some touch up paint,and never heard from them.