I give up... I have already coated my bandsaw table with 2 coats of Johnsons Paste Wax, thick coats, and I am seeing faint signs of rust already(I cannot tell if thats just some that I never got up, but if any more accumulates then this will apply.) I was wondering if it would be possible to just paint it, and be done with it!
I realize I am being a bit anal about the rust, but in the moisture of my workshop/garage, it seems to be the only solution I can see...(I really dont feel like putting another $200 on a dehumidifier.)
How much would a powder coat cost?
Would this leave a smoothe enough surface?
I havent been in my garage in the past two days(eye is still dialated, so I am sensitive to light.) But this really is no fun to be derusting every couple days..... Dang.... darned global warming causing all this moisture....
-brendan