Outfeed/assembly table idea

[kevin loftus]

Mine is simiar to that except that instead of storage bins, I fastened "runners" to the side walls of the sections and suspended plastic restaurant bus trays for drawers (the big grey tubs they use for dishes when they clear tables). The outer rim on the top of the tray rides on the runners. The bus trays can be found online pretty cheap. IIRC I got 15 of them for less than $50 shipped. Since there is no top on them, I put doors on the front of the cabinet to keep the dust out. Got the idea out of a magazine a few years back.

Cat litter trays work too.

[Brad Townsend]

Cat litter trays work too.

Hopefully you are suggesting NEW ones.

[Matt Kestenbaum]

Based on my own build a few months ago, you might want to consider leveling feet at the corners and also using some of the under space to accommodate jigs and fixtures. I found the leveling feet (set into T-nuts in each leg) helped fit the table to the uneven floor that I have. And I built a shelf underneath that is big enough to store a crosscut sled and also a auxiliary fence fixture.

[Daniel Smith]

Cat litter trays work too.

Only if you don't have a cat.