Would like to find the supplier for this curved glass award.
Would like to find the supplier for this curved glass award.
Last edited by Robert Rosensteel; 05-27-2010 at 10:42 AM.
Sandcraved Glassware, Stone and Tile
Engraver of Coats of Arms
Laser 60 W Xenetech XLT 2436 New Hermes IS400,7200 Glastar Mini, Scat Blast 6' cabinet.Tile saw. Corel X4 PotoGrave3 Adobe CS3,
I haven't seen the base but the curved glass is available several places including JDS.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Thanks Mike thats the problem I need the base it is a on going award. That we have picked up from the customer.
Sandcraved Glassware, Stone and Tile
Engraver of Coats of Arms
Laser 60 W Xenetech XLT 2436 New Hermes IS400,7200 Glastar Mini, Scat Blast 6' cabinet.Tile saw. Corel X4 PotoGrave3 Adobe CS3,
Not sure if it helps, but that photo is from here :
crystalgiftsengraved.com/curvedglass.html
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
Hey Scott your right that is the only place I could find it so far. I need about 6-8 of these wholesale. If nothing else comes up I will call them and ask if they can name the supplier. Thanks Robert
Sandcraved Glassware, Stone and Tile
Engraver of Coats of Arms
Laser 60 W Xenetech XLT 2436 New Hermes IS400,7200 Glastar Mini, Scat Blast 6' cabinet.Tile saw. Corel X4 PotoGrave3 Adobe CS3,
you might look:
graphicice com
itemID VBGZE-DECOZ
Last edited by jack Halley; 05-27-2010 at 10:21 AM. Reason: correction
Jack Halley
30w Pinnacle M, 30w Accuris Powersharp 12, Vinyl Express Q75
Hi Jack took a look at the website and tried the 331442973 # with no luck. Scroll threw the awards in glass no luck. Thanks Robert
Sandcraved Glassware, Stone and Tile
Engraver of Coats of Arms
Laser 60 W Xenetech XLT 2436 New Hermes IS400,7200 Glastar Mini, Scat Blast 6' cabinet.Tile saw. Corel X4 PotoGrave3 Adobe CS3,
I'll send you a PM. I don't like to post supplier information on a public forum.
-
David Takes
Expressions Engraved
St. Joseph, MO
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
It's just my preference to not make this information readily available to potential retail customers, whether mine or anyone elses here. I do know that with some work anyone can dig up the wholesale source for just about any product out there. I just don't want to make that any easier than it already is.
-
David Takes
Expressions Engraved
St. Joseph, MO
That's certainly your choice, but I doubt you'll find many retail customers on this site... we're the ones making/selling, not buying.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Thank you everyone who gave info, and David you were right on target. Again thanks my problem is solved Robert
Sandcraved Glassware, Stone and Tile
Engraver of Coats of Arms
Laser 60 W Xenetech XLT 2436 New Hermes IS400,7200 Glastar Mini, Scat Blast 6' cabinet.Tile saw. Corel X4 PotoGrave3 Adobe CS3,
Glad to help and get you on the path to more business. That is a beautiful piece. To top it off, I felt their price was pretty good.
-
David Takes
Expressions Engraved
St. Joseph, MO
Right now I see 17 members and 28 'guests' the site, so it wouldn't be out
of the question that there might be some retail shoppers reading here. And
while most people understand about overhead, labor, consumables and
such, you don't necessarily want to broadcast your suppliers or costs.
I belong to some trade groups that allow members to use their logo for
marketing purposes, but many opt not to use them because members will
often discuss prices. They don't want their customers reading this.
And we all know that there are a lot of retail customers who want it for
your cost plus $1
Chuck, That is exactly my point. Sawmill Creek does come up high on many Google searches and will display the information to ANYONE.
-
David Takes
Expressions Engraved
St. Joseph, MO