Here are the photos of mine.
This box was made when most of my saws were of the Japanese pull style.
There is just a spline on a shim to hold a saw or two.
On the left there is an area with dowels through the divider to hold chisels, pencils, screwdrivers or any small tools.
Rack and Saw.jpg
It is not long enough to hold most western saws.
The front wall is shorter than the back edge mostly because that is the size of the scrap pieces that were laying around.
Side View.jpg
The end view shows were a small dowel was inserted to hold the handle dowel in place.
End View.jpg
This was designed to be a general purpose tote to haul what ever tools are needed be it electrical, plumbing, wood or mechanical.
As mentioned earlier, it was just nailed together to carry some tools one day. When one of those magical round tuits comes my way maybe a nicer example will be constructed.
jim