Results 1 to 8 of 8

Thread: Forum idea... "My SMC"

  1. #1
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1

    Forum idea... "My SMC"

    On almost every other forum I'm on that uses vBulletin, there is a page customized specifically to my interests, usually called "My yadda yadda yadda". It's the first thing I'm directed to after logging in (or where I directly surf to on sites I stay logged in, such as this one), and it contains links to the most recent posts of threads I have contributed to, as well as links to only the forums I've specified. This prevents me from seeing the entire list of available forums (unless I want to) every time... I'm not a Neanderthal hand tool user,for example, so I would rarely visit said forum.

    Now that I'm visiting more than one forum on a regular basis, I'd like to make it a bit easier to get around. I'm assuming this is a plug-in for vB? Any chance we could get it installed?
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press

    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5

  2. #2
    If you click on "New Posts" you can exclude all the forums you don't want to visit....then search for new posts. You can also save the setup.
    Glenn Clabo
    Michigan

  3. #3
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1
    Glenn,

    I saw this thread as I dug deeper:
    http://www.sawmillcreek.org/showthread.php?t=127139

    It mentions the "updated thread" bit, but it was unclear to me how to access the option. I'll have to do some digging in my CP...
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press

    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5

  4. #4
    Join Date
    Feb 2007
    Location
    Savannah, GA
    Posts
    4,422
    Dan,

    The first place I go when I stop by SMC is my User CP, that way I can immediately see updates to the threads to which I have subscribed.

    “Life is not so short but that there is always time enough for courtesy and chivalry.” —Ralph Waldo Emerson

    Everybody knows what to do with the devil but them that has him. My Grandmother
    I had a guardian angel at one time, but my little devil got him drunk, tattooed, and left him penniless at a strip club. I have not had another angel assigned to me yet.
    I didn't change my mind, my mind changed me.
    Bella Terra

  5. #5
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1
    Ah, I see the "New Posts" link now... in the middle of the helper bar at the top of every page. If what I suggested in my original post cannot be easily done (at least with Aaron's tight schedule), I would at least like to see the forums I choose to be saved, as suggested in the thread I linked to from 6 months ago... selecting the forums I don't care about each time is just as annoying as having to go to each one to check for new threads.
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press

    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5

  6. #6
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1
    Belinda,

    Does the CP allow you to list specific forums in the "subscribed threads" area? I don't want to subscribe to every thread I post in just to see responses, it should be done for me automatically.

    It sounds like the functionality I desire is in there, I just can't figure out how/where it's located.
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press

    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5

  7. #7
    Join Date
    Feb 2007
    Location
    Savannah, GA
    Posts
    4,422
    Quote Originally Posted by Dan Hintz View Post
    Belinda,

    Does the CP allow you to list specific forums in the "subscribed threads" area? I don't want to subscribe to every thread I post in just to see responses, it should be done for me automatically.

    It sounds like the functionality I desire is in there, I just can't figure out how/where it's located.
    If you can list specific forums I, like you, haven't figured it out yet.

    The CP lists only threads with new replies that you haven't viewed. It also gives you the option to reply or unsubscribe.

    “Life is not so short but that there is always time enough for courtesy and chivalry.” —Ralph Waldo Emerson

    Everybody knows what to do with the devil but them that has him. My Grandmother
    I had a guardian angel at one time, but my little devil got him drunk, tattooed, and left him penniless at a strip club. I have not had another angel assigned to me yet.
    I didn't change my mind, my mind changed me.
    Bella Terra

  8. #8
    Join Date
    Mar 2003
    Location
    Monroe, MI
    Posts
    11,896
    Quote Originally Posted by Dan Hintz View Post
    Ah, I see the "New Posts" link now... in the middle of the helper bar at the top of every page. If what I suggested in my original post cannot be easily done (at least with Aaron's tight schedule), I would at least like to see the forums I choose to be saved, as suggested in the thread I linked to from 6 months ago... selecting the forums I don't care about each time is just as annoying as having to go to each one to check for new threads.
    It will save them if you check the "Save above options" checkbox.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •