Rubbing out Minwax Tung Oil finish

[johanes purnama]

You can try to rub your finish to fix your problem.
Use 400 grade sandpaper put in a hand block to sand your finish. sand it until all your nibs is gone and you get a smooth and even surface.
After that you can rub your finishing with steel wool to bring up your sheen. Then you can apply a paste wax to polish the surface.
If you sanding process cannot give you a even surface then you need to re coat with your oil.

Rubbing and polishing for wood finishing

Good luck

Johan

[Ronald Kot]

If you put wax over a tung oil finish, doesnt the wax stop you from putting more tung oil on later?

If you do want to touch up the tung oil finish, now wit wax on top of it, what do you have to do?....remover the wax first with some kind of wax stripper?