I was just about to sell my Craftsman 10" RAS when I needed to cut some half lap joints for a bookcase. I put a 6" Forrest Dado King stacked dado set on it that I had left when I sold my contractor saw and replaced it with a SS ICS (it requires an 8" dado stack). The decent dado set made a world of difference in the performance of this saw and now I'm going to keep it. In order to do that I need recommendations on a quality blade for it. I would likely default to a Forrest Chopmaster (I use the WWII on my table saw and love it), but I'm open to opinions. Thanks for the time and input.