Czech Edge chisels

[Eric Brown]

Just got my set of Czeck Edge chisels from Bob Zajicek.
They range in size from 1/8" to 3/8".
Fit and finish look great. Came sharp, but not honed.
Still on backorder are two skew chisels.
Not on website yet but maybe soon.
If interested just ask him.
Discount if ordering a set.

Eric

Chisels.jpg

[Gary Hodgin]

Looks like a nice set of chisels.

[Leigh Betsch]

They look great. I find that I like working with pretty tools!

[Mark Wyatt]

They look nice. What are the handles made from?

[David Gendron]

Nice looking set of chisels! good for you. They look similar to my Blue Spruce... on the picture any way
Let us know how you like them!

[Eric Brown]

I don't know what type of wood they used but the color is in the impregnation. The brass is solid brass with square broached holes for the blades. My only minor gripes are that the makers name is not on the chisels nor are any sizes. The plastic bag they were each sent in are marked Czech Edge. They also each came with a plastic tip protector. Also in the package were extra tip protectors.

They feel well balanced and seem a good length for detail work.

Soon I'll start on a music box for SWMBO.

Oh, and thanks. They do look good.

Eric

[Mike Olson]

nice chisels, but i'm actually more interested in the ruler. where did you get that?

[Andrew Gibson]

I had a chance to meet Bob at the LN tool event here in Tampa. Great guy and his marking knives and chisels are really nice.

The Chisels look great! I would guess that the handles are Curly Maple... the grain looks right.

[Eric Brown]

Mike I can't tell you much about the ruler. Picked it up on E-Bay a few years ago. Here are details:

Size: 12" long, 1 7/8" wide, 5/16" thick
Graduations: 1/4's and 16th's
There are 12 different woods. Each is about 1" square showing front and back. The construction was basically gluing the wood squares into a row and adding a strip on each side.
The edge with printing is sloped down until it meets a brass metal insert.
The other edge has a simple profile on it.
The woods were: Poplar, Butternut, Locust, Oak, Maple, Cedar, Sycamore, Chestnut, Cherry, Ash, Walnut, Lynn
The printing and rule divisions look to have been embossed.

There is a patent number D-94078
On the back was hand burned "Chimney Rock N.C."

I got it as a handy wood reference.
And no, it's not for sale.

Enjoy. Eric

[Ron Brese]

The handles of the Czeck Edge chisels are a stablized wood product made from curly maple and died ebony. These chisels were developed as dovetail chisels, hence the small sizes. I'm also making use of these chisels for operations other than just cutting dovetails. They're small size makes them a great for inlay work. The ferrules are actually bronze.

I actually saw an attendee at a Lie-Nielsen hand tool event in Chicago drive one of these chisels completely thru a 3/4" piece of walnut with no damage to the stabilized wood handle.

Ron Brese

[David Gendron]

I actually saw an attendee at a Lie-Nielsen hand tool event in Chicago drive one of these chisels completely thru a 3/4" piece of walnut with no damage to the stabilized wood handle.

Ron Brese[/QUOTE]

Just for fun... Isn't it over killed for the use these chisels are intended for??
Thant said, I think my BS DT chisels have a similar wood treatement...