I have been asked to cut some 1/4" wood for a prototype. They will need around 100 or so to start and possibly 4000-5000 at a time after that if the product takes off. They supply the wood and I do not have to clean what I cut. I cut they take. They are 12x9 L shaped with some curves. I can cut 1 in about 1-1.5 minutes. I should be able to fit 6-8 at once on an 18x24 sheet of wood in my Helix. I am thinking I can combine some of the straight cuts as one as 3 of the sides are straight. I have not tried to do a whole group yet. I am thinking I will give a price for under 100, and then some sort of increments up from there. What do people feel would be a reasonalbe quote for this? When the go to full production they would like to be in the $1 range per piece. Any help would be great.
Thanks
Tim