Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: My Christmas/Holiday Card to my friends at SMC!

  1. #1
    Join Date
    Mar 2003
    Location
    Peshtigo, WI (~50 miles N of Green Bay)
    Posts
    1,403

    My Christmas/Holiday Card to my friends at SMC!

    Hi Folks,
    This has been posted before. As I recall, you long-time SMC members may have seen it more than once.

    Regardless, this is my annual Christmas/Holiday card to all of my friends on the CREEK!! If you are a recent member, I hope that you will get a bit of a kick out of the following:


    T’was a week before Christmas, and all through the shop,
    Not a motor was spinning, no breakers would pop!
    The scroll saw was silent, the lathe was not turning,
    The bandsaw and PM for power were yearning.

    I had tried for a LONG time to do it just right,
    But the presents I made were a pitiful sight.
    The tools were all GOOD ones and had done their best,
    It was MY skill that failed in the ultimate test.

    So, alas, when I searched way under the tree,
    Not a present was there, the problem was ME.
    There was NO time to try it all over again,
    I’ll face up to fact and live with the pain.

    I emptied the DC with tedious care,
    In hopes that a useable chip would be there.
    My scrapbox was bulging and right in the way,
    There was wood for the heater for many a day.

    My family and friends are usually quite good,
    I had wanted to make them some presents from wood.
    But the stuff that came out of my efforts was bad,
    There was NOTHING done right. It was really quite sad.

    Then out of the blue, on the roof was a clatter,
    I donned my Jet jacket to check out the matter.
    It was a funny round guy with a suit red and warm,
    And with him were elves, with tool belts like Norm.

    They entered my shop, and with no plans at all,
    They started each tool and were having a ball.
    The DC was choking with dust and with chips,
    Every cut was precise, absolutely no slips.

    Each clock that they made, was an object of art,
    Their skill was apparent, on each little part.
    The finish was added with a miracle brush,
    Three coats in an hour, there was no need to rush.

    The boxes for jewelry, they did with much care,
    They knew that a lady would savor their ware.
    Each tiny dovetail on each little drawer,
    Was fitted by hands that had done it before.

    The music that played when each ring drawer was out,
    Was planned for the lady, of that have no doubt.
    “Love Me Tender” for Jan, “Sound of Music” for Julie,
    Their choices were perfect. Of that I speak truly.

    The last one they made was for my daughter Stace,
    There was no question here, “Amazing Grace”.
    One finish was poly, the others were oiled,
    They were rubbed out by hands that were not even soiled.

    Even the reindeer got into the act,
    Now this was a team, and that is a fact.
    Each of the reindeer donated a hint,
    Of antler for pens with a marble-like glint.

    Enthused as I was, as I watched all that skill,
    I wanted to help, but was told to, “SIT STILL!”
    “We’ve got enough help, all the tools are in use”;
    At least that was Santa’s transparent excuse.

    With incredible swiftness and talent I saw,
    The elves make my dreams look like ones that I draw.
    In a matter of moments, Mr. Claus and his elves,
    Had made many memories, to fill many shelves.

    As the jolly old guy and his crew swept the floor,
    He handed me books and instructions galore.
    He didn’t exactly critique my intent,
    But kindly suggested my Forrest was bent.

    I noted a tear as they rose to the sky,
    No doubt from some sawdust that caught in my eye.
    And I heard the big guy, as he yelled to the rear,
    “Merry Christmas, keep tryin’, but I’ll be back next year!”

    “Well”, I said to myself as they sped to the Yule,
    “Question Santa Claus? NEVER! You cynical fool!”
    For those who may question this story the most,
    I’ve got proof in the scanner, if my picture will post.
    Attached Images Attached Images
    Last edited by Dale Thompson; 12-16-2004 at 7:04 PM. Reason: Picture not attached
    I am so busy REMAKING my projects that I don't have time to make them the FIRST time!

  2. #2
    Join Date
    Jun 2004
    Location
    Cape Cod, Ma
    Posts
    762
    Thanks, Dale. I guess "the shoe fits". I can relate to that.

    Lou
    Procrastination.......

    Maybe I'll think about that tomorrow

  3. #3
    Join Date
    Jan 2004
    Location
    Lake Villa, IL
    Posts
    47
    Dale, that is great.

    I can identify with it myself - at least from the desire and initial outcome.

    Merry Christmas one and all.

    Greg

  4. #4
    Join Date
    Oct 2004
    Location
    Leechburg, Pa.
    Posts
    18
    It is a great story. But oh so true. I can relate to all of it.

    May you and yours have a Merry Christmas!
    Scott


    Woodchips....Natures Vitamins

  5. #5
    Join Date
    Mar 2004
    Location
    Toronto, Ontario, Canada
    Posts
    3,789
    Very good Dale! I assume that you are the poet.

    This is my first Christmas as a member of Saw Mill Creek so the poem is new to me.

  6. #6
    Join Date
    Feb 2003
    Location
    Just outside of Spring Green, Wisconsin
    Posts
    9,442
    ..And knowing Dale, as we all know Dale, every last word of it must be true, right? Yeah. Right! Merry Christmas, Dale! My biggest Christmas wish would be that, some day, I would have just a small percentage of your skills and talent! Carry on, my friend. Carry on!
    Cheers,
    John K. Miliunas

    Cannot find REALITY.SYS. Universe halted.
    60 grit is a turning tool, ain't it?
    SMC is totally supported by volunteers and your generosity! Please help if you can!
    Looking for something for nothing? Check here!

  7. #7
    Join Date
    Feb 2003
    Location
    Gloucester, VA
    Posts
    1,996
    That's a great poem-- I always enjoy reading it.
    _Aaron_
    SawmillCreek Administrator

  8. #8
    Join Date
    Sep 2004
    Location
    Jacksonville, FL
    Posts
    859
    Thanks Dale. That was great reading.


    Merry Christmas to all.
    Marshall
    ---------------------------
    A Stickley fan boy.

  9. #9
    Join Date
    Jul 2004
    Location
    Fort Worth, Texas
    Posts
    282
    Dale - that's a wonderful poem! I plan to share it with my friends and family - I'm sure they will see me in it - I know I sure see me.

    Merry Christmas to all!

    Betsy

  10. #10
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,938
    Happy holidays, Dale! (and everyone else, of course...)
    --

    The most expensive tool is the one you buy "cheaply" and often...

  11. #11
    Nice thought Dale and Merry Christmas to all (of you Creekers!)
    If sawdust were gold, I'd be rich!

    Byron Trantham
    Fredericksburg, VA
    WUD WKR1

  12. #12
    Join Date
    Mar 2003
    Location
    Peshtigo, WI (~50 miles N of Green Bay)
    Posts
    1,403

    You're right!

    Quote Originally Posted by Frank Pellow
    Very good Dale! I assume that you are the poet.
    Frank,
    YUP! It's me. I've got another one on slot car racing if anyone is interested. In fact, that is a woodworking topic also - especially considering the design and construction of the banked curves.

    Just say the word and I'll post it. I'll warn you that it's long but if you are a racing fan, you may sort of enjoy it.

    Dale T.
    I am so busy REMAKING my projects that I don't have time to make them the FIRST time!

  13. #13
    Wow, that's great Dale!! Thanks for sharing....I resemble that story!!!

  14. #14
    Join Date
    Mar 2003
    Location
    Peshtigo, WI (~50 miles N of Green Bay)
    Posts
    1,403

    What is truth?

    Quote Originally Posted by John Miliunas
    .. every last word of it must be true, right?
    Hey Spring,
    I would never lie to a fellow "cheesehead". Obviously, you don't need Santa's help or he would be there for you. Thank you for your additional comments. I accept them only in the spirit of the season. Remember, Santa knows if you are telling the truth or not. I hope that you don't get a "stick and a piece of coal" in your stocking.

    Dale T.
    I am so busy REMAKING my projects that I don't have time to make them the FIRST time!

  15. #15
    Join Date
    Feb 2003
    Location
    Just outside of Spring Green, Wisconsin
    Posts
    9,442
    Wrong again, my Peshy friend! Santa must figure I have enough tools AND time to do the house stuff, go to work AND get a bunch of presents done! Not this year, I'm afraid. So, he sent along an extra plastic card to "help" me out. He also must've figured I make enough of my own "sticks", so he's giving me a break on that, as well! Though I think he mentioned something about sending the coal "Up North" somewhere. Not too far from Green Bay, as I recall.
    Cheers,
    John K. Miliunas

    Cannot find REALITY.SYS. Universe halted.
    60 grit is a turning tool, ain't it?
    SMC is totally supported by volunteers and your generosity! Please help if you can!
    Looking for something for nothing? Check here!

Similar Threads

  1. 40% gift card rebate at HD on handtools
    By Steve Roxberg in forum General Woodworking and Power Tools
    Replies: 16
    Last Post: 11-05-2004, 8:27 PM
  2. CF Card Washed???
    By Hal Peeler in forum Off Topic Forum
    Replies: 4
    Last Post: 08-31-2004, 7:37 AM
  3. Sound card question
    By Don Henthorn Smithville, TX in forum Off Topic Forum
    Replies: 13
    Last Post: 10-22-2003, 11:00 PM
  4. Still having sound card problems
    By Don Henthorn Smithville, TX in forum Off Topic Forum
    Replies: 1
    Last Post: 10-05-2003, 6:17 PM
  5. Pens For Friends Update
    By Scott Greaves in forum General Woodworking and Power Tools
    Replies: 2
    Last Post: 07-11-2003, 11:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •