Results 1 to 15 of 353

Thread: Winners - 2 Sidewinder Router Lifts

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    14,776

    Winners - 2 Sidewinder Router Lifts

    FreeStuff Winners October 26th, 2010 - See Post #344 for the names of the winners.
    Woodpeckers SW350 - Sidewinder Router Lift For 3.5" Diameter Motor

    Justin from Woodpeckers, Inc and Tom Walz of Carbide Processors, Inc have teamed up to offer this great prize, actually two great prizes that are bound to make two of you very happy.

    Two of these router lifts have been donated so we will draw two winners names on October 26th, 2010.

    The SW350 fits all smaller 3-1/2” diameter motors without needing any adapters. This group includes but is not limited to the Porter-Cable 690/890 series motors, DeWalt 618, Bosch 1617/1618 and Craftsman models 17542, 17540, 28190.

    The latest and greatest in patented router lift technology is the basis of the new Woodpeckers Side Winder Router Lift. This state-of-the-art router lift combines Woodpeckers' patented quick lift design with a side crank assembly for fine adjustment. Now you can raise your router bit above the table in seconds with just a ¼ turn of the lift wrench, change router bits, lower it to an approximate position and fine tune with the side crank to a resolution of .001” per scale increment or 1/32" per rotation.

    The lift itself fits into most standard 9-1/4 x 11-3/4 by 3/8 deep openings and is clamped in from underneath. The side crank assembly attaches to the side of the router table stand or cabinet.

    Sidewinder Router Lift

    Woodpeckers Inc.

    SawMill Creek Contributors and Friends of The Creek are eligible for this drawing by posting in this thread.
    Attached Images Attached Images
    Last edited by Jackie Outten; 10-26-2010 at 7:18 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •