Hi,
I'm building my own router table.
For the plate, I'm going to get a piece of thick acrylic and drill all the needed wholes.
Well, if I ever want to get a factory made router plate, I'd like to use the most commonly size used today.
But I've found there are two very common size:
9" x 12"
and
8 1/4" x 11 3/4" (found in Rockler and bench dog tables among others)
I've also found some router plates at 9 1/4" x 11 3/4, but I think these are not that common.
So, what's the most common plate size?