1/8 collet for 1/4 routers

[Michael Simpson Virgina]

Does any one know of a 1/4 to 1/8 adapter for a router. I would like to use some of my 1/8 Fordome diamond bits to engrave some hard surfaces.

[Joe De Medeiros]

have you tried precisebits dot com

[Michael Simpson Virgina]

They only carry collets for a couple routers. I need a 1/4 to 1/8 adapter to fit my Festool router.

[Ed Harrall]

Try this http://www.cadcamcadcam.com/sleeve-adaptor14to18.aspx

[Gerry Grzadzinski]

MLCS has them as well.

[Jerome Stanek]

I picked one up at Production Tool.

[Michael Simpson Virgina]

Thanks I ordered a couple from MCLS