Jon Endres
Killing Trees Since 1983
That's a little better! This is the part I saw:
What's Included
- (1) Bin cup
I've got a few of these containers:
http://www.harborfreight.com/19-bin-...ase-93928.html
http://www.harborfreight.com/8-bin-p...ase-93927.html
I bought mine at the big blue Borg, but the units at Harbor Freight appear to be identical (at a lower price).
I use them for fasteners that I need to keep mobile. I've got one for outdoor fasteners (SS, deck screws, etc.), one full of anchors for hanging stuff around the house (pictures, etc), and another one full of drywall screws.
The rest of my hardware is slowly making the trip into rack mounted Akro bin clones:
http://www.harborfreight.com/wall-mo...ins-65889.html
When I finally get enough bins and boxes, I'm planning on building a rolling cabinet to contain it all along with other hardware bits like hinges, knobs, etc.
Jay wrote:
Geez Jay, you've done what I should have done ages ago. I have the hanging wall bins in the barn - that's great. I have the little plastic drawers in the barn - also great. But each time I have a project, I fill up a little container with what I need. And everytime it's a pain. But a couple of those mobile units organized by type of task is the way to go. Good call.I use them for fasteners that I need to keep mobile. I've got one for outdoor fasteners (SS, deck screws, etc.), one full of anchors for hanging stuff around the house (pictures, etc), and another one full of drywall screws.
- Bob R.
Collegeville PA (30 minutes west of Philly)
this is what I use
Dave
IN GOD WE TRUST
USN Retired
Holy organized Batman!
Dave, that's exactly what I want to build to house all of my bins and boxes. Do you have a problem with stuff in the door bins spilling out if you slip and close the door too hard?
Thanks Bob. The larger cases work well for drywall and wood screws, nails, etc. The small cases are pretty good for machine screws and nuts. I have found, however, that none of them work well for thin washers (#10-ish and below). They tend to slip up and over the tops of the bins. I bought a bunch of small "craft baggies" at Wally World to keep the washers where I put them
I posted a similar query a while ago - but was thinking of storing drills as well as fasteners. Not sure how it's gong to play out, but I've ended up with several types of storage (not sure exactly how I'll divide stuff between them yet):
1. Wall mount bins, in my case made by Clarke and much like those Jay bought. The one issue I see there is that they be inclined to fill with dust and debris if kept in a open shop.
2. Storage cases like the HF units Jay mentions, in my case stackable and with removable dividers for adjustability. An issue here may be that if the dividers manage to work upwards in their slots the contents of a section may leak through underneath into the next compartment.
3.Several metal storage cabinets with small plastic drawers, made by Clarke. My sense is that it's important that the drawers are easily removable so you can tip the content out to sort through them.
IKEA can be a good source for low cost storage units of one sort or another too. e.g http://www.ikea.com/us/en/catalog/products/60071358
Ian
[QUOTE=Jay Maiers;1584422]Holy organized Batman!
Dave, that's exactly what I want to build to house all of my bins and boxes. Do you have a problem with stuff in the door bins spilling out if you slip and close the door too hard?
Jay, everything stays unless you slam the door hard
Dave
IN GOD WE TRUST
USN Retired
I have 2 of these...
Except mine came from Home Depot.
The thing I hate about them is that you have to order the drawer dividers separately.
For the few items I have in larger quantity than the bins support, I have plastic coffee cans on a shelf.
I am not super happy with this setup. I am wishing I was using something more like...
I would like a method to be able to more easily remove the stuff and take it to the bench. The wall mounted boxes just don't cut it...
Last edited by David Hostetler; 12-14-2010 at 2:32 PM.
Trying to follow the example of the master...
I have one of the bottom containers shown for some fasteners, but you have to be careful that the cross-ribs in the lid fit precisely over the bin edges (they don't always) or some smaller pieces will work their way from one bin to another. Otherwise, it IS a nice way to transport many different items easily.
I have a few stack on bins, but I am considering buying some dandy drawers.
http://dandydrawers.com/
MK
I use them, and have been quite happy with them. Easy to build a cabinet for them, and cheap enough that you can buy a boatload. You can divide each drawer into two parts (one divider long ways), three parts (two short dividers sideways) or six (combination). I've got three dedicated drawers for 8-32 machine screws (pan head, hex head, and normal), specific drawers for #6, #7 and #8 Kreg pocket screws, one for shelf pins, one for confirmats, even one for M7 bolts--you can get seriously compartmentalized. I think I've got like six dozen of the things in a 6 x 12 array. No way I could have organized all that stuff w/o 'em.
This outfit has metal compartmented boxes which fit in matching cabinets. The individual boxes slide out from the cabinet and can be opened, or they may be removed and carried to the work site. The box tops latch.
http://www.durhammfg.com/catalog.html?id=44