Woodslicer or Timberwolf?

[Brian Riley]

Hey Mark...

Thanks much for putting in the time to do that. I greatly appreciate it. Which Trimaster are you using? I called Ittura again today but Louis wasn't available to talk. From what he had said before the 3/4 vari-tooth would give a smoother cut but those are special order from Lenox. I was curious how that would compare to say a 2/3 variable or even the standard 3 tpi. At this point I don't know what he has in stock but that really doesn't matter. I'd rather get the right blade even if that means waiting a bit.

Below is the chart I pulled from the Lenox website with the different Trimaster blade specs.


Thanks again,
Brian

[Mark Singer]

Brian,

It is a 1" variable pitch....carbide.